Update Ilmi Version - 3Com CoreBuilder 7000 Management Manual

Update ILMI Version

Updates the ILMI version for the specified port in the oreBuilder 7000
family ATM switch.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Port ID
IMLI version
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 8 1 2 3.2 1
The following message is displayed:
ILMI version is reconfigured.
The ILMI version of port 3.2 is updated to 3.1.
(1) SET: Switch setup
(8) IME: ILMI setup
(1) VER: ILMI version setup
(2) SET: Set & save ILMI version
Format or Range
slot.port
0 to update to version 3.0
1 to update to version 3.1
2 to update to version 4.0
[parameters]
1 1 8 1 2
The ILMI version is updated for the selected port
immediately and is saved in flash.
ILMI version is reconfigured.
ILMI Setup 129