Reset Les Configurations - 3Com CoreBuilder 7000 Management Manual

Reset LES Resets all LES configurations in the CoreBuilder 7000 switch to
Configurations factory-default values including LES-BUS address, ELAN response policy
and LE_ARP response policies.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following message appears:
Do you really want to reset config y/n?
Reset of saved configuration was done.
The LES configurations of the CoreBuilder 7000 switch are restored to
their factory default values.
(2) LEM: LAN Emulation
(2) LES: LE Services
2 2 3 1 8
All LES configurations for the CoreBuilder switch are
reset.
Do you really want to reset config y/n?
Reset of saved configuration was done.
2 2 3 1 8
LE_ARP Policy Configuration
(3) ELN: ELANs Information
(1) LSU: LES Setup
(8) RES: Reset Saved Configuration
337