Set Optimization For Realtime-Vbr - 3Com CoreBuilder 7000 Management Manual

C 13: C
418
HAPTER ONFIGURING AND
Set Optimization for
RealTime-VBR
M PNNI (F
ANAGING
Updates the Real Time Variable Bit Rate (VBR) optimization parameter. A
change to the RtVBR optimization parameter takes place immediately.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
constant bit rate
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 3 5 2 2 2
The following message is displayed:
Default Value is '3 - opt_ctd', New value is '2 - opt_av_cr'
Press ENTER to continue...
The value of the RealTime-VBR optimization parameter is updated.
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(5) OPT: Optimization Metrics
(2) SOP: Set Optimization
(2) ORV: Optimization for
Format or Range
0 - 6
1 1 10 4 3 5 2 2 [parameters]
The real time VBR optimization parameter is displayed
and is updated to its new value.
Default value is <x>, new value is
<y>.
)
NLY
Metrics
RealTime-VBR