Display Signaling Protocol Version - 3Com CoreBuilder 7000 Management Manual

Display Signaling
Protocol Version
Displays the current UNI signaling protocol version for the specified port.
It can be either version 3.0, 3.1 or 4.0.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 4 5 3
(1) SET: Switch setup
(4) SIG: Signaling setup
(5) SPS: Signaling protocol setup
(3) GPV: Get protocol version
1 1 4 5 3
The current signaling protocol version for each port is
displayed.
Information is displayed as shown in the example.
Signaling Setup 203