Display Ilmi Channel Polling Interval - 3Com CoreBuilder 7000 Management Manual

C 6: ILMI C
138
HAPTER
Display ILMI Channel
Polling Interval
ONFIGURATION
Displays the ILMI channel polling interval for the specified port of the
CoreBuilder 7000 family ATM switch. For more information, "ILMI
Connectivity Polling" on page 41 in the Operations Guide.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 8 5 3 3.2
The following message is displayed:
ILMI polling timeout is 30 sec.
(1) SET: Switch setup
(8) IME: ILMI setup
(5) POL: Polling setup
(3) GTO: Get polling timeout
Format or Range
slot.port
[parameters]
1 1 8 5 3
The ILMI channel polling interval for the specified port
is displayed.
ILMI polling timeout is <n> sec.