Set Avcr Minimum Threshold (%) - 3Com CoreBuilder 7000 Management Manual

C 13: C
406
HAPTER ONFIGURING AND
Set AvCR Minimum
Threshold (%)
M PNNI (F
ANAGING
Sets the AvCR minimum threshold percentage. The AvCR minimum
threshold percentage is the minimum percentage change in bandwidth,
after which a node will inform its neighbors of a significant change via a
PTSE. For more information on PTSE regeneration, see "PTSE" on page
78 in the Operations Guide. A change to the AvCR minimum threshold
percentage value takes place after the next reboot.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
percentage
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 3 4 10 15
The following message is displayed:
Default Value is 3, new value is 15
Press ENTER to continue...
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(10) AMT: AvCR Minimum
Format or Range
1 - 99%
1 1 10 4 3 4 10 [parameters]
The AvCR minimum threshold is displayed and is
updated to its new value.
Default value is <x>, new value is <y>
)
NLY
Threshold(%)