Restart Ilmi At A Port - 3Com CoreBuilder 7000 Management Manual

C 6: ILMI C
146
HAPTER

Restart ILMI at a Port

ONFIGURATION
Restarts the ILMI for the specified port of the CoreBuilder 7000 family
ATM switch.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 8 7 1 3.2
The following message is displayed:
ILMI was restarted on port/s.
(1) SET: Switch setup
(8) IME: ILMI setup
(7) RES: Restart ILMI IME
(1) RES: Restart ILMI
Format or Range
slot.port
[parameters]
1 1 8 7 1
The ILMI for the specified port is restarted.
ILMI was restarted on port/s.