3Com CoreBuilder 7000 Management Manual page 204

C 7: C
204
HAPTER ONFIGURING
Protocol version:
-----------------
Port id:
Current val:
Val for save:
Next reb val:
Port id:
Current val:
Val for save:
Next reb val:
Port id:
Current val:
Val for save:
Next reb val:
Port id:
Current val:
Val for save:
Next reb val:
Press ENTER to continue or 'x'ENTER
V C
IRTUAL HANNELS
The following information is displayed:
<3.1> <3.2> <3.3> <3.4> <3.5> <3.6> <3.7> <3.8>
4.0 4.0 4.0
4.0 4.0 4.0
4.0 4.0 4.0
<4.1> <4.2> <4.3> <4.4>
4.0 4.0 4.0
4.0 4.0 4.0
4.0 4.0 4.0
<5.1> <5.2> <5.3> <5.4> <5.5> <5.6> <5.7> <5.8>
4.0 4.0 4.0
4.0 4.0 4.0
4.0 4.0 4.0
<6.1> <6.2> <6.3> <6.4> <6.5> <6.6> <6.7> <6.8>
4.0 4.0 4.0
4.0 4.0 4.0
4.0 4.0 4.0
Table 30 shows the protocol version parameters displayed by the
command.
Table 30 Protocol Version Parameters
Name
Port ID
Current val
Val for save
Next reb val
3.1 4.0 4.0
4.0 4.0 4.0
4.0 4.0 4.0
4.0
4.0
4.0
4.0 4.0 4.0
4.0 4.0 4.0
4.0 4.0 4.0
4.0 4.0 4.0
4.0 4.0 4.0
4.0 4.0 4.0
to exit...
Description
ID of port on which the protocol version is being set.
The active protocol version: 3.0, 3.1, or 4.0
The protocol version to be saved to flash memory under
the SAV command. This entry is always the same as
Current val.
The protocol version currently in flash memory. It is
activated on next reboot.
3.0 4.0
4.0 4.0
4.0 4.0
4.0 4.0
4.0 4.0
4.0 4.0
4.0 4.0
4.0 4.0
4.0 4.0