Set Svcc Retry Time - 3Com CoreBuilder 7000 Management Manual

C 13: C
410
HAPTER ONFIGURING AND

Set SVCC Retry Time

M PNNI (F
ANAGING
Sets the SVCC (Switch Virtual Channel Connection) retry time. The SVCC
retry time is the time that the specified node will delay after a viable
SVCC-based RCC is unexpectedly taken down, before attempting to
reestablish it. A change to the SVCC retry time takes place after the next
reboot.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
initiation time
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 3 4 14
The following message is displayed:
Default Value is 30, new value is 20
Press ENTER to continue...
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(14) SRT: SVCC retry time
Format or Range
1-60000 seconds
1 1 10 4 3 4 14
The SVCC retry time is displayed and is updated to its
new value.
Default value is <x>. New value is <y>
)
NLY