Display De-Registered Atm Addresses At Port - 3Com CoreBuilder 7000 Management Manual

Display De-registered
ATM Addresses at
Port
Port ATM address: Network prefix
id
------- --------------------------------------- ---------------------------
<3.1> 47. 0. 0. 0. 0. 0.3c. 0. 0.b*. *. *. *
<3.2> 47. 0. 0. 0. 0. 0.3c. 0. 0.c*. *. *. *
Displays IME or static ATM addresses at the specified port that were
de-registered by LMA or IME but whose connections are still active. These
addresses have not yet been erased from the address table associated
with the port.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Table 21 describes the IME parameters displayed by the command.
Example
Enter:
3 1 3 0.0
The following information is displayed:
(1) ADD: ATM addresses
(3) ACT: Not active addresses
Format or Range
slot.port (0.0 for all ports)
3 1 3 [parameters]
The de-registered IME or static ATM addresses for the
specified port are displayed.
Information is displayed as shown in the example
below.
ATM address: user_part Member
*. *. *. *. *. *. *
*. *. *. *. *. *. *
ILMI ATM Addresses 155
id
3101
3201