Display Interface Card Parameters - 3Com CoreBuilder 7000 Management Manual

C 5: C
106
HAPTER ONFIGURING
Display Interface
Card Parameters
I M
NTERFACE ODULES
Displays parameters of the individual interface modules at the ports of an
installed interface card. You are prompted to specify an interface card for
display.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Slot ID
Direct access sequence:
Command Result
System action taken:
System message display:
Interface Card Parameters
Example
Enter:
1
1 5
Parameters of the interface modules at the ports of the selected interface
Card #1, an 8-Port Board ATM interface card, are displayed:
(5) IFC: Interface cards
(n) IFn; (n=1,4)
Format or Range
3-6
[parameters]
1 5 n 1
Parameters for the interface modules of card n are
displayed.
Get board info completed successfully.