3Com CoreBuilder 7000 Management Manual page 386

C 13: C M PNNI (F E V O )
386
HAPTER ONFIGURING AND ANAGING OR THE XTENDED ERSION NLY
The address is updated to its new value.
The ESI of the ATM address displayed can also be changed by editing the
existing address. This is done by pressing the BackSpace, left and/or right
arrow keys at the prompt and overwriting any of the last six bytes of the
address.
The hex value 'FF' in the example above is a selector (byte number 20). It
has local significance only, is ignored by PNNI routing and cannot be
changed.