Display Le_Arp Response Policy - 3Com CoreBuilder 7000 Management Manual

Display LE_ARP Displays the policy for handling LAN Emulation Address Resolution
Response Policy Protocol (LE_ARP) requests for a specified ELAN. See Table 50 for the
possible LE_ARP policies.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The LE_ARP policy of the ELAN with ELAN ID 2 is displayed as follows:
Response policy is FORWARD REQUEST
LE_ARP Verification Policies
.
Table 50 LE_ARP Verification Policies
Parameter
ELAN ID
2 2 3 1 4 2
Name Description
Respond Checks the address table of the LES in the CoreBuilder 7000. If
the LAN destination is not found, it sends the LE_ARP request to
all LECs in the ELAN. If the LAN destination is found, it sends the
LE_ARP response to recipients selected according to the ELAN
response policy (see "Display ELAN Response Policy" on page
328).
LE_ARP Policy Configuration
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Information
(1) LSU: LES Setup
(4) GAR: Get LE arp policy
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
2 2 3 1 4 [parameters]
The response policy for the specified ELAN is updated.
The update takes place immediately.
Response policy is:
331