Display Topology Link Information - 3Com CoreBuilder 7000 Management Manual

Display Topology Link
Information
Displays all links for each node whose information is stored in the
topology database.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Topology Link PTSE Table Parameters
For a full description of all the parameters displayed in the node
information table, see Table 59: PTSE Table Parameters - Node Topology
Link Section.
Example
Enter:
1 1 10 4 7 3
The following information is displayed:
Showing PNNI Information
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(7) SHO: Show PNNI information
(3) TOP: Topology (Link) PTSEs
1 1 10 4 7 3
All links for each node whose information is stored in
the database are displayed.
Information is displayed as shown in the example.
453