Switch Security; Display Switch Security Status - 3Com CoreBuilder 7000 Management Manual

Switch Security

Display Switch
Security Status
The following commands allow you to enable or disable the LEC
admission security for the entire switch. For more information, see "LANE
Security" on page 161 in the Operations Guide.

Display Switch Security Status

Enable/Disable Switch Security
Displays the LEC admission security status for the switch.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 3 3 1
The LEC admission security status for the switch is displayed as follows:
Security on switch is: DISABLED
(2) LEM: LAN Emulation
(3) SEC: LE Security Configuration
(3) SWS: Switch security
(1) GST: Get switch security state
2 3 3 1
The LEC admission security status for the switch is
displayed.
Security on switch is: ENABLED/DISABLED
Switch Security 367