Nni Hops Setup; Display Maximum Nni Hops - 3Com CoreBuilder 7000 Management Manual

NNI Hops Setup

Display Maximum
NNI Hops
The following commands allow you to configure the NNI hops parameter.

Display Maximum NNI Hops

Update Maximum NNI Hops
For more information about hops,see "Hop Limit — Avoiding Loops" on
page 127 in the Operations Guide.
Displays the maximum number of hops permissible for NNI routing. This
parameter limits the number of times a setup message can be transferred
between switches on NNI connections in search of a destination, thereby
avoiding an infinite loop.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 3 1
The following message is displayed:
Current NNI max hops: 7
(1) SET: Switch setup
(3) NNI: NNI setup
(1) GMD: NNI get max num of hops
1 1 3 1
The maximum number of hops permissible for NNI
routing is displayed.
Current NNI max hops:
NNI Hops Setup 193