Set Cbr Administrative Weight - 3Com CoreBuilder 7000 Management Manual

C 13: C
426
HAPTER ONFIGURING AND
Set CBR
Administrative
Weight
M PNNI (F
ANAGING
Sets the CBR Administrative Weight parameter. The CBR administrative
weight is the administrative weight of this interface port for the constant
bit rate service category.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
CBR admin weight
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 4 2 2 6000
The following message is displayed:
Default value is 5040, new value is set to 6000
Press ENTER to continue...
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(4) ICF: Interface Configuration
(2) IPR: Interface Parameters
(2) CBR: CBR Admin Weight
Format or Range
1 - 2147483647
1 1 10 4 4 2 2 [parameters]
The CBR admin weight parameter is updated to its
new value.
Default value is 5040, new value is
set to <n>
)
NLY