Create Permanent Virtual Channel (Pvc); Display Pvc Vpi/Vci Limits - 3Com CoreBuilder 7000 Management Manual

Create Permanent
Virtual Channel
(PVC)
Display PVC VPI/VCI
Limits
The following commands allow you to create a PVC.

Display PVC VPI/VCI Limits

Create UBR PVC — Full Setup
Create UBR PVC — Quick Setup
Add PVC Destination
Release PVC
Release PVC Destination
Save PVC Connections To Flash
Erase PVC Connections from Flash
For more information about PVC, see"Permanent Virtual Channels" on
page 100 in the Operations Guide.
Displays the VPI/VCI values allowed for PVCs and displays the PVC menu.
Command Actions
Enter the menu sequence: (3) CON: Connections
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 4 1
The following information is displayed:

Create Permanent Virtual Channel (PVC)

(4) S&C: Setup and Config Conns
(1) PVC: PVC operations
3 4 1
The VCI/VPI limit information for PVCs is displayed.
Information is displayed as shown in the example on
page 179.
179