Enable Lecs - 3Com CoreBuilder 7000 Management Manual

C 9: M
258
HAPTER ANAGING

Enable LECS

LAN E S
MULATION ERVICES
Enables the LECS in the CoreBuilder 7000 family ATM switch after the
next reboot. This command also enables the resident LESs.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 5 2 2
The following message is displayed:
LECS service status is set for the next reboot.
(1) SYS: Platform Setup
(1) SET: Switch Setup
(5) SLE: LE Setup
(2) LCS: LECS Setup
(2) ELS: Enable & save LECS service
1 1 5 2 2
The LECS is enabled after the next reboot. The LES is
also enabled.
LECS service status is set for the next
reboot.