Lec Not In Elan Security List; Display Lec Elan Join Privilege - 3Com CoreBuilder 7000 Management Manual

C 12: LEC ELAN A
356
HAPTER
LEC not in ELAN
Security List
Display LEC ELAN Join
Privilege
S
DMISSION ECURITY
The following commands let you configure the LEC ELAN admission
security for LECs which are not in the ELAN security list. For more
information, see "LANE Security" on page 161 in the Operations Guide.

Display LEC ELAN Join Privilege

Update LEC ELAN Join Privilege for Current Session
Displays the default ELAN join privilege for LECs which are not in the
ELAN security list. The default join privilege can be Accept or Reject. To
change the default join privilege, see "Update LEC ELAN Join Privilege for
Current Session" on page 357.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 3 1 1 1
The following message is displayed:
Default behavior is: ACCEPT.
The ELAN join privilege for LECs which are not in the ELAN security list is
displayed for the ELAN with ID 1.
(2) LEM: LAN Emulation
(3) SEC: LE Security Configuration
(1) EDB: Elan default behavior
(1) GDF: Get elan default behavior
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
2 3 1 1 [parameters]
The ELAN join privilege for LECs which are not in the
ELAN security list is displayed.
Default behavior is: ACCEPT