Set ABR
Sets the ABR Administrative Weight parameter. The ABR administrative
Administrative
weight is the administrative weight of this interface port for the available
Weight
bit rate service category.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following message is displayed:
Default value is 5040, new value is set to 19000
Press ENTER to continue...
Parameter
ABR admin weight
1 1 10 4 4 2 5 19000
Setting Interface Parameters
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(4) ICF: Interface Configuration
(2) IPR: Interface Parameters
(5) ABW: ABR Admin Weight
Format or Range
1 - 2147483647
1 1 10 4 4 2 5 [parameters]
The ABR admin weight parameter is updated to its
new value.
Default Value is 5040, New value is set to <n>.
429