Save Protocol Timer Resolution - 3Com CoreBuilder 7000 Management Manual

Save Protocol Timer
Resolution
The current timer resolution parameter is saved to flash.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 4 1 3
The following message is displayed:
Signaling config parameters were successfully saved.
The timer resolution is saved to flash.
(1) SET: Switch setup
(4) SIG: Signaling setup
(1) RES: Timer Resolution setup
(3) SAV: Save Timer Resolution
1 1 4 1 3
The current timer resolution is saved to flash memory.
Signaling config parameters were
successfully saved.
Signaling Timers 213