Display Ilmi Version - 3Com CoreBuilder 7000 Management Manual

C 6: ILMI C
128
HAPTER

Display ILMI Version

ONFIGURATION
Get Fast Auto-Configuration ON/OFF Status
Set Fast Auto-Configuration ON/OFF Status
For more information about the ILMI, "Integrated Local Management
Interface (ILMI)" on page 36 in the Operations Guide.
Displays the ILMI version for the specified port of the CoreBuilder 7000
family ATM switch. For more information, "ILMI Version" on page 49 in
the Operations Guide.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 8 1 1 3.2
The following message is displayed:
ILMI version is 4.0
(1) SET: Switch setup
(8) IME: ILMI setup
(1) VER: ILMI version setup
(1) GET: Get ILMI version
Format or Range
slot.port
1 1 8 1 1 [parameters]
The ILMI version for the specified port is displayed.
ILMI version is 3.0/3.1/4.0