Perform A Security Check On A Lec - 3Com CoreBuilder 7000 Management Manual

C 12: LEC ELAN A
366
HAPTER
Perform a Security
Check on a LEC
S
DMISSION ECURITY
Performs a security check on a LEC or group of LECs for the specified
ELAN for the current session. The candidate LEC is searched for in the
security list of the ELAN. If it is found, its join privilege is displayed. If it is
not found then the ELAN default behavior is displayed.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
ATM address or network
prefix of LEC
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 3 2 7 1
47.00.00.00.00.00.3c.00.00.a0.00.00.00.00.c0.da.34.55.0c.00
The LEC with the specified ATM address is checked in the security list for
the ELAN with ID 1.
(2) LEM: LAN Emulation
(3) SEC: LE Security Configuration
(2) STB: Security tables entries
(7) CHK: Perform a security check
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
ATM address
2 3 2 7 [parameters]
The specified LEC is checked in the security table for
the ELAN.
Permission is: Accept/Reject