Set Optimization For Abr - 3Com CoreBuilder 7000 Management Manual

C 13: C
420
HAPTER ONFIGURING AND
Set Optimization for
ABR
M PNNI (F
ANAGING
Updates the Available Bit Rate (ABR) optimization parameter. A change to
the ABR optimization parameter takes place immediately.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
constant bit rate
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 3 5 2 4 4
The following message is displayed:
Default Value is '3 - opt_ctd', New value is '4 - opt_ctv'
Press ENTER to continue...
The value of the ABR optimization parameter is updated to 4.
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(5) OPT: Optimization Metrics
(2) SOP: Set Optimization
(4) OAR: Optimization for ABR
Format or Range
0 - 6
1 1 10 4 3 5 2 4 [parameters]
The ABR optimization parameter is displayed and is
updated to its new value.
Default value is <x>. New value is
<y>.
)
NLY
Metrics