Ilmi Configuration; Ilmi Setup - 3Com CoreBuilder 7000 Management Manual

6

ILMI Setup

ILMI C
ONFIGURATION
This chapter describes ILMI configuration for the CoreBuilder
family ATM switch platform. The topics include:
ILMI Setup
ILMI ATM Addresses
In this section, the commands used to set up the ILMI are described. They
include:
Display ILMI Version
Update ILMI Version
Display Auto-Configuration Status
Enable/Disable Auto-Configuration
Display Auto-Discovery Status
Enable/Disable Auto-Discovery
Display LECS-Address Access Status
Update LECS-Address Access Status
Display ILMI Channel Polling Status
Enable/Disable ILMI Channel Polling
Display ILMI Channel Polling Interval
Update ILMI Channel Polling Interval
Display Auto-Configuration Results
Display Auto-Discovery Results
Restart ILMI at a Port
Display Change of Attachment-Point Status
Enable/Disable Change of Attachment-Point
®
7000