Save Signaling Protocol Configuration - 3Com CoreBuilder 7000 Management Manual

C 7: C
206
HAPTER ONFIGURING
Save Signaling
Protocol
Configuration
V C
IRTUAL HANNELS
The current signaling protocol profile and the protocol version are saved
to flash.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 4 5 5
The following message is displayed:
Signaling config parameters were successful saved.
The signaling protocol profile and protocol version are saved to flash.
(1) SET: Switch setup
(4) SIG: Signaling setup
(5) SPS: Signaling protocol setup
(5) SAV: Save signaling protocol
1 1 4 5 5
The signaling protocol profile and protocol version is
saved to flash memory.
Signaling config parameters were
successfully saved.