Display Call-Proceeding Suppression Status - 3Com CoreBuilder 7000 Management Manual

Display
CALL-PROCEEDING
Suppression Status
Displays the status of the call-proceeding message suppression facility.
With the call-proceeding enable flag, you can suppress the CALL
PROCEEDING message that is returned to the edge-device or end-user
that has sent a signaling SETUP message. For more information,see
"CALL-PROCEEDING Message" on page 106 in the Operations Guide.
Suppressing the call-proceeding message results in a more efficient
signaling operation.
When the call-proceeding flag is ON, the call-proceeding message is sent.
When the call-proceeding flag is OFF, the call-proceeding message is
suppressed.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 4 6 1
The following message is displayed:
Call proceeding flag is ON.
(1) SET: Switch setup
(4) SIG: Signaling setup
(6) CCL: Signaling call ctrl setup
(1) GET: Get call proceeding flag
1 1 4 6 1
The call-proceeding enable flag is displayed
Call proceeding flag is ON/OFF
Signaling Setup 207