Display Current Mpc Configuration - 3Com CoreBuilder 7000 Management Manual

Display Current MPC
Configuration
MPOA Client Configuration
-------------------------
MPC-p1 shortcut-setup frame count:
MPC-p2 shortcut-setup frame time:
MPC-p3 flow detection protocols:
MPC-p4 MPC initial retry time:
MPC-p5 MPC retry time maximum:
MPC-p6 hold down time:
Displays all the current settings of the MPC variables.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 5 2 1
The following information is displayed:
MPOA Devices Configuration
(2) LEM: LAN Emulation
(5) MPA: MPOA Devices Configuration
(2) MPC: MPOA Client Configuration
(1) DIS: Display current config
2 5 2 1
All the current settings of the MPC variables are
displayed.
Information is displayed as shown in the example
below.
10 (a number)
1 (seconds)
{}
5 (seconds)
40 (seconds)
160 (seconds)
277