3Com CoreBuilder 7000 Management Manual page 154

C 6: ILMI C
154
HAPTER
Port ATM address: Network prefix
id
------- --------------------------------------- ---------------------
<6.1> 47. 0. 0. 0. 0. 0.3c. 0. 0.b*. *. *. *
<6.8> 47. 0. 0. 0. 0. 0.3c. 0. 0.c*. *. *. *
ONFIGURATION
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
3 1 2 0.0
The following information is displayed.
(1) ADD: ATM addresses
(2) STC: Static addresses
Format or Range
slot.port (0.0 for all ports)
3 1 2 [parameters]
All ATM addresses registered for the specified port are
displayed.
Information is displayed as shown in the example
below.
ATM address:user_part
*. *. *. *. *. *. *
*. *. *. *. *. *. *
Mem
------
6101
6801