Set & Save Enhanced E.164 Address Support State - 3Com CoreBuilder 7000 Management Manual

C 13: C
374
HAPTER ONFIGURING AND
Set & Save Enhanced
E.164 Address
Support State
M PNNI (F
ANAGING
Updates the status of the enhanced E.164 address support state to
ENABLED or DISABLED and saves it in flash memory. A change to the
status takes place after the next reboot. See "ATM Address Format" on
page 39 in the Operations Guide for more information on E.164.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
E.164 address support
state
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 2 2 1
The following message is displayed:
Enhanced E.164 Address Support is ENABLED.
The status of the enhanced E.164 address support is set to ENABLED and
is saved in flash memory.
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(2) EEA: Enhanced E164 Address
Support
(2) SET: Set & Save Enhanced
Format or Range
0 to disable enhanced E.164 address support
1 to enable enhanced E.164 address support
1 1 10 4 2 2 [parameters]
The status of the enhanced E.164 address support
state is updated to ENABLED or DISABLED.
Enhanced E.164 Address Support is
DISABLED/ENABLED.
)
NLY
E.164 Addr Support State