3Com CoreBuilder 7000 Management Manual page 237

Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
4 8 3.1
The physical statistics are reset for port <3.1> and the following message
is displayed.
Reset physical counters completed successfully.
(8) PHR: Phy layer-reset counters
Format or Range
slot.port (0.0 for all ports)
4 8
Physical statistics for the switch are reset for the
specified port.
Reset physical counters completed
successfully.
Physical Statistics 237