Display Ethernet Encapsulation Type - 3Com CoreBuilder 7000 Management Manual

C 4: C
82
HAPTER ONFIGURING AND
Display Ethernet
Encapsulation Type
M S
ANAGING THE WITCH
Displays the current Ethernet encapsulation type configuration of the
CoreBuilder 7000 family ATM switch. The Ethernet encapsulation type
parameter determines how the CoreBuilder 7000 family ATM switch
interprets Ethernet frames that enter through the Ethernet management
port. For more information, see "Ethernet Encapsulation Type" on page
204 in the Operations Guide.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 7 1
The following message is displayed:
Current Eth Type is: ETH
M
ODULES
(1) SET: Switch setup
(2) MNG: Management setup
(7) ETH: Eth Type Setup
(1) GET: Get Eth Type
1 1 2 7 1
The current Eth Type configuration is displayed.
Current Eth Type is: