Release Pvc - 3Com CoreBuilder 7000 Management Manual

Release PVC

Releases a specified PVC. PVCs must be manually released. When a P2M
PVC is released, all additional destination connections are also released.
You cannot release an SVC with this command.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Call ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following message is displayed:
A PVC with call id 10 was released.
Format or Range
Integer. See (3)CON\(2)RTG\(1)CLL to get Call IDs for a
port.
3 4 1 4 [parameters]
The PVC with the specified call ID is released.
A PVC with call id <n> was released.
3 4 1 4 10
Create Permanent Virtual Channel (PVC)
(4) S&C: Setup and Config Conns
(1) PVC: PVC operations
(4) REP: Release PVC call
185