Reset Configuration Parameter Group - 3Com CoreBuilder 7000 Management Manual

Reset Configuration
Parameter Group
The following message appears:
All configuration parameters are reset to their factory
values.
Resets all configuration parameters in a configuration group to their
factory default settings.
Configuration parameters are divided into group according to their
location in flash memory. You can reset all the parameters in a specific
group. The following groups can be reset:
Number Configuration Group
1 LECS Database
2 LECS Order List
3 PVC Connections
4 Box Profile
5 ATM Addresses
6 PNNI Configuration
7 LANE Security
It is recommended to perform this command when the switch is off-line.
After executing this command the switch is automatically rebooted. The
switch is configured after rebooting.
Resetting Configuration Parameters 91