Get Node Id - 3Com CoreBuilder 7000 Management Manual

Get Node ID

Displays the ID (ATM address) of the PNNI node (22 bytes).
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following message is displayed:
PNNI Node 1 of 1.
NodeID:48.A0.47.00.00.00.00.4C.00.00.03.00.00.00.00.C0.DA.60
.1B.9F.FF
(1) SYS: Platform config
(1) SET: Switch setup
1 1 10 4 3 3 4 1
The current PNNI node id is displayed.
PNNI Node x of y.
Node ID: <address>
1 1 10 4 3 3 4 1
Configuring PNNI Nodes
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(3) CHR: Characteristics
(4) NID: Node ID
(1) GID: Get Node ID
389