Update Le_Arp Response Policy For Route Descriptor - 3Com CoreBuilder 7000 Management Manual

C 11: C
336
HAPTER ONFIGURING
Update LE_ARP
Response Policy for
Route Descriptor
LAN E S
MULATION ERVERS
Updates the additional policy for handling LE_ARP requests for a Token
Ring ELAN: Reject Request or Forward Request. The new response policy
will go into effect immediately. Note that this is a global setting for all the
clients in that ELAN. The factory default value is "Forward Request". See
Table 51 for a description of LE_ARP route descriptor policies.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
Response policy
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 2 3 1 7 2 1
The LE_ARP response policy for Route Descriptors of the ELAN with ELAN
ID 2 is updated to Reject.
This parameter is valid only in a Token Ring ELAN.
(LES) C
AND LIENTS
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Information
(1) LSU: LES Setup
(7) SRD: Set ARP Pol. for non-reg RD
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
1-Reject
2-Forward Request
Table 51
LE_ARP Policies for Route Descriptor
see
2 2 3 1 7 [parameters]
The LE_ARP response policy for Route Descriptors in
the specified ELAN is updated. The update takes place
immediately.
Policy was successfully saved on flash.