Display Single-Ip Mode - 3Com CoreBuilder 7000 Management Manual

C 4: C
84
HAPTER ONFIGURING AND
Display Single-IP
Mode
M S
ANAGING THE WITCH
Displays the mode of the single-IP facility of the CoreBuilder 7000 family
ATM switch. For more information about the single-IP facility, see
"Chassis Management — Single IP" on page 197 in the Operations
Guide.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 8 1
The following message is displayed:
The current Mode is : single-IP mode
M
ODULES
(1) SET: Switch setup
(2) MNG: Management setup
(8) SIS: Single IP setup
(1) GSI: Get Single IP Mode
1 1 2 8 1
The single-IP mode is displayed.
The current Mode is: