Set Peer Delayed Ack Interval - 3Com CoreBuilder 7000 Management Manual

C 13: C
404
HAPTER ONFIGURING AND
Set Peer Delayed ACK
Interval
M PNNI (F
ANAGING
Sets the peer delayed acknowledge interval. The peer delayed
acknowledge interval is the minimum time period (expressed in
milliseconds) between transmissions of delayed PTSE acknowledgment
packets. A change to the peer delayed ACK interval value takes place
after the next reboot.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
interval
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 3 4 8 15
The following message is displayed:
Default value is 10, new value is 15
Press ENTER to continue...
E V O
OR THE XTENDED ERSION
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(8) PDA: Peer Delayed ACK
Format or Range
1 - 300 milliseconds
1 1 10 4 3 4 8 [parameters]
The retransmit interval is displayed and is updated to
its new value.
Default value is <x>, New value is <y>
)
NLY
Interval