9
LAN Emulation
Services Setup
M
ANAGING
S
ERVICES
This chapter describes how to configure LAN Emulation services in the
®
CoreBuilder
7000 family ATM switch.
LAN Emulation Services Setup
LAN Emulation Redundancy Setup
LANE Version of Switch
MPOA Devices Configuration
For more information about LAN Emulation, see Chapter 7 in the
Operations Guide.
The following commands allow you to set up the LAN Emulation services.
Display LAN Emulation Services Status
Enable LAN Emulation Services
Disable LAN Emulation Services
Display LECS Status
Enable LECS
Disable LECS
Wait three minutes after each LECS update operation before rebooting
the switch to allow the new parameter values to be stored in flash
memory.
LAN E
MULATION