Configuring The Route Cache - 3Com CoreBuilder 7000 Management Manual

Configuring the
Route Cache
The following prompt is displayed:
Set PNNI Scope Mapping Table to defaults (y/n)
Enter 'y' or 'Y', all other input keeps the old values
Y
The following message is displayed:
PNNI Scope Mapping Table is set to default values
Press ENTER to continue...
The following commands allow you to set up the route cache parameters.
Get Cache State
Set Cache State
Get Cache Refresh for ADD PARTY
Set Cache State for ADD PARTY
Get Max Number of Routes per Cache
Set Max Number of Routes per Cache

Configuring the Route Cache

439