C
11: C
322
HAPTER
ONFIGURING
ELAN Parameters
Display ELAN
Parameters in LES
Database
LAN E
S
MULATION
ERVERS
The following commands allow you to configure the ELAN parameters.
Display ELAN Parameters in LES Database
Update ELAN Parameters in LES Database
Displays general information about the 16 ELANs resident in the
CoreBuilder 7000 family ATM switch. The information is taken from the
LES database (see "Display ELAN Parameters in LECS Database" on page
292 for information about parameters in the LECS database).
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
.
Enter:
2 2 2
The following information is displayed:
(LES)
C
AND
LIENTS
(2) LEM: LAN Emulation
(2) LES: LE Service
(2) GEN: ELANs General Info
2 2 2
The ELAN information specified in
displayed.
Information is displayed as shown in the example
below.
Table 47
is