Display Lec Address Info - 3Com CoreBuilder 7000 Management Manual

Display LEC Address
Info
Displays all MAC addresses, ATM addresses, and Route Descriptors of a
specified LEC which are registered in the LES ARP-cache of a specified
ELAN. A LEC is specified by its ID. If you do not know a LEC's ID you can
specify a value of 0 to display information for all LECs.
For LANE 2.0 clients, TLNs belonging to the registration are displayed as
well.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
ELAN ID
LEC ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
2 2 3 31 0
The MAC and ATM addresses for all LECs of the ELAN with ELAN ID 1 are
displayed as follows:
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Information
(3) ADD: Clients MAC Addresses
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
0- For all
2 2 3 3 [parameters]
The Primary ATM Address, MAC address and ATM
addresses for the specified ELAN and LEC ID are
displayed.
Information is displayed as shown in the example
below.
LEC Operations 345