3Com CoreBuilder 7000 Management Manual page 89

After executing this command the switch is automatically rebooted. The
switch is configured after rebooting.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Enter a parameter at the prompt
Parameter
Continue prompt
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 2 2
The following prompt is displayed:
This will reset all configuration to factory defaults and
then reboot the box!
Are you sure? (Y/N)? N
Enter to confirm,
Y N
The following message appears:
All configuration parameters are reset to their factory
values.
Resetting Configuration Parameters
(2) FLS: Flash setup
(2) RAC: Reset all configs to
defaults
Format or Range
y or n
1 2 2
All configuration parameters are reset to their factory
default values.
All configuration parameters are reset
to their factory values.
to cancel reset.
89