Update Maximum Nni Hops - 3Com CoreBuilder 7000 Management Manual

C 7: C
194
HAPTER ONFIGURING
Update Maximum
NNI Hops
V C
IRTUAL HANNELS
Updates the Maximum NNI Hops parameter of the CoreBuilder 7000
family ATM switch. The choice of parameter value depends on the size
and topology of the network. For a hierarchically designed network, it is
normally chosen to be 7. For more information, see "Hop Limit —
Avoiding Loops" on page 127 in the Operations Guide.
Command Actions
Enter the menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 3 2 7
The following message is displayed:
NNI max hops was set.
The Maximum NNI Hops parameter is updated to 7.
(1) SYS: Platform config
(1) SET: Switch setup
(3) NNI: NNI setup
(2) SMD: NNI set&save max num hops
1 1 3 2
The maximum number of hops permissible for NNI
routing is displayed.
NNI max hops was set.