Set Cdv Proportional Multiplier (%) - 3Com CoreBuilder 7000 Management Manual

Set CDV Proportional
Multiplier (%)
Sets the CDV proportional multiplier percentage. The CDV proportional
multiplier percentage is the percentage difference in the Cell Delay
Variation metrics from the last value advertised. A change to the CDV
proportional multiplier percentage value takes place after the next
reboot.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Parameter
percentage
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 3 4 11 15
The following message is displayed:
Default Value is 25, new value is 15
Press ENTER to continue...
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(4) TIM: Timers
(11) CDV: CDV Proportional
Multiplier(%)
Format or Range
1 - 99%
1 1 10 4 3 4 11 [parameters]
The CDV proportional multiplier is displayed and is
updated to its new value.
Default value is <x>, new value is <y>
Setting the Timers 407