Set Pgl Priority - 3Com CoreBuilder 7000 Management Manual

Set PGL Priority

Updates the node peer group priority. Currently, the peer group priority is
set to 0 and cannot be changed.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The following message is displayed:
Node 1 of 1. Node PGL Priority is: 0
(1) SYS: Platform config
(1) SET: Switch setup
1 1 10 4 3 3 6 2 [parameters]
The node peer group priority is displayed.
Node <x> of <y>. Node PGL Priority is: 0
1 1 10 4 3 3 6 2
Configuring PNNI Nodes
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(3) CHR: Characteristics
(6) PRI: PGL Priority
(2) SPR: Set PGL Priority
395