Update Le_Arp Response Policy - 3Com CoreBuilder 7000 Management Manual

Update LE_ARP Updates the policy for handling LE_ARP requests for an ELAN: Respond or
Response Policy Forward Request. The new response policy takes effect immediately. The
factory default value is "forward request". See Table 50 for a description
of LE_ARP policies.
This is a global setting for all the clients in the specified ELAN.
Command Actions
Enter menu sequence:
Enter a parameter at the prompt
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
The LE_ARP policy of the ELAN with ELAN ID 2 is updated to Respond.
Parameter
ELAN ID
Response policy
2 2 3 1 5 2 1
LE_ARP Policy Configuration
(2) LEM: LAN Emulation
(2) LES: LE Services
(3) ELN: ELANs Information
(1) LSU: LES Setup
(5) SAR: Set & Save LE arp policy
Format or Range
1–16
See "Display ELAN Parameters in LES Database" on
page 322.
1-Respond
2-Forward Request
Table 50
(see LE_ARP Verification Policies)
2 2 3 1 5 [parameters]
The response policy for the specified ELAN is updated.
The update takes place immediately.
LE_ARP policy was set
LE_ARP policy was successfully saved on
flash
Parameters: 'elan id' - '12'
333