Display Current Default Gateway Configuration - 3Com CoreBuilder 7000 Management Manual

C 4: C
74
HAPTER ONFIGURING AND
Display Current
Default Gateway
Configuration
M S
ANAGING THE WITCH
Displays the current Default Gateway configuration of the CoreBuilder
7000 family ATM switch. The Default Gateway is used to locate the NMS
if it is not found on the local subnet.
Command Actions
Enter the menu sequence: (1) SYS: Platform config
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 2 3 1
The following message is displayed:
Current Default Gateway address: 151.104.78.20.
M
ODULES
(1) SET: Switch setup
(2) MNG: Management setup
(3) GWY: Default gateway setup
(1) GGW: Get default gateway
1 1 2 3 1
The current default gateway configuration is displayed.
Current Default Gateway address: