Get Node Administrative Status - 3Com CoreBuilder 7000 Management Manual

Get Node
Administrative Status
Displays the administrative status of the PNNI node. The administrative
status of the node may be UP or DOWN.
Command Actions
Enter menu sequence:
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
1 1 10 4 3 2 1
The following message is displayed:
Node 1 of 1. PNNI Node Administrative Status is UP.
Configuring PNNI Nodes
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(2) ADM: Admin Status
(1) GAS: Get Node Admin Status
1 1 10 4 3 2 1
The number and administrative status of the PNNI
node are displayed.
Node <m> of <n>. PNNI Node
Administrative Status is UP/DOWN.
377